Select Page

Formatinio pjovimo staklės

Standards

The machine is equipped with:

  • Direct start
  • Scoring unit with separate motor
  • Aluminium carriage with hardened steel rails sliding on balls
  • Anodized sliding table and profiles
  • Rip fence with micrometric adjustment and eccentric locking
  • Suction hood on the guard dia. 60mm
  • Suction hood on the adjustable support dia. 120mm

MACHINE “CE”
– “CE” standards
– Blade safety guard on the riving knife with support and suction pipe
– Table extension
MACHINE “EXP”
– Basic electric equipment (overload motor protection, emergency switch)
– Blade safety guard on the riving knife

Technical Data
Sliding table sizes 330×3200 mm
Cross-cut capacity with scoring unit 3220 mm
Cut height at 90° 102 mm
Cut height at 45° 70 mm
Main blade “CE” dia. 315 mm
Main blade “EXP” dia. 350 mm
Blade rotation speed 4000 g/1′
Blade tilt 0 – 45 °
Protruding from the working table with blade dia. 350 mm completely down at 25 mm
Protruding from the working table with blade dia. 300 mm completely down at 0 mm
Blade dia. 315 mm – scoring blade dia. 120 mm
Blade dia. 350 mm – scoring blade dia. 100 mm
Cut width between blade and rip fence 1050 mm
Motor power 5,5 (4) hp (kw)
Net weight 610 kg
Noise level 87-89 db (A)
Optional

REDUCTION FOR SLIDING TABLE OF 2600 MM (Cross-cut capacity with scoring unit 2620 mm.)
+30°-45° TILTING ALUMINIUM FENCE
WOODPRESSER WITH ECCENTRIC MOVEMENT
SCREW AND ECCENTRIC WOODPRESSER
SMALL TABLE FOR PARALLEL CUTS
BLADE GUARD ‘CE’ with support and suction pipe (machine “EXP”)
OVER ARM SAW BLADE GUARD ‘CE’
QUICK SELECTION EXTENSIBLE FENCE – Extensible fence with quick selection of 5 positions of the flip over stop
1500 MM. CUTTING WIDTH TO RIP FENCE
ELECTRONIC READ-OUT OF RIP FENCE with eccentric locking and micrometric adjustment
NO. 2 ELECTRONIC READ-OUTS/EXTENS. FENCE
Increased extensible aluminium fence for cross-cut carriage, with no. 2 electronic read-outs on the magnetic band, for flip over stops positioning:
* 1st read-out for 1st and 2nd flip over stop with separate positioning and compensation of the size in relation to the tilting angle
* 2nd read-out on the extension of the fence with compensation of the size in relation to the tilting angle
AUTOMATIC STAR-DELTA START (only for machine “CE”)
OUTFEED TABLE EXTENSION (machine “EXP”)
RIVING KNIFE 3 MM (FOR BLADE 350 MM) (machine EXP”)
TELESCOPIC EXTENSION 470 MAX
KIT TO WORK WITH CUTTER (DADO BLADE) (Available only for machine “EXP”)
Cutter dimensions 20x200mm
PNEUMATIC PRESSER 3200 MM
DOUBLE CARBIDE SCORING BLADE D. 100 MM
Z 12+12 – tooth thickness 2,8/3,6 mm
DOUBLE CARBIDE SCORING BLADE DIA. 120 MM
Z 12+12 – tooth thickness 2,8/3,6 mm
CARBIDE SAW BLADE DIA. 300 MM
Z 72 – tooth thickness 3,2 mm
CARBIDE SAW BLADE DIA. 350 MM
Z 84 – tooth thickness 3,5 mm
SINGLE-PHASE MOTOR 4HP (3KW) 50HZ
SINGLE-PHASE MOTOR 4.8HP (3.6KW) 60HZ
MOTOR POWER 7,5 HP (5,5 KW) 50 HZ
MOTOR POWER 9 HP (6,6 KW) 60 HZ