Select Page

GI 1100/1300 2 BELTS

Standards

The machines are equipped with:

  • Automatic centering of the mat
  • Belt length 2150 mm
  • Automatic exclusion of the rollers from the control board
  • 6-position mechanic positioner for grain replacement
  • Motorized table lifting
  • Automatic star delta start
  • Spring loaded rubber covered pressure rollers
  • Automatic positioner of the working table
  • No. 2 in-feed table rollers
  • No. 2 out-feed table rollers
  • Electronic display unit
  • Brake lining
  • Limiting emergency bar
  • Automatic belt oscillation
  • 2 Abrasive belts grain 80-120
  • ‘CE’ standards

Technical Data

Useful working width GI 1100 1100 mm
Useful working width GI 1300 1350 mm
Min. working length GI 1100/2-GI 1300/2 (RR) 280 mm
Min. working length GI 1100/2-GI 1300/2 (RT-RRT) 370 mm
Abrasive belts length GI 1100 2150×1120 mm
Abrasive belts length GI 1300 2150×1370 mm
Net weight GI 1100/2 RR 1700 kg
Net weight GI 1300/2 RR 1800 kg
Net weight GI 1100/2 RRT 2000 kg
Net weight GI 1300/2 RRT 2100 kg
Useful working height 160 mm
Min. working height 3 mm
Abrasive belt speed 1st roller 18 m/sec
Abrasive belt speed 2nd roller 16 m/sec
Main motor power 20 (15) hp (kw)
Table lifting motor power 0,35 hp
Feeding motor reducer 0,75 hp
Variable feeding speed of the mat 4-20 m/1′
2 Suction dust hoods dia. 160 mm

Optional

2ND ROLLER DIA. 320 MM MODEL RR
TIME CONTROLLED BLOWER TO CLEAN BELT
2 TIME CONTROLLED BLOWERS TO CLEAN BELTS
STIFF PAD EXCLUSION FROM CONTROL BOARD
FRONT PULL-OUT CONVEYOR ROLLER 500 MM
BACK PULL-OUT CONVEYOR ROLLER 500 MM
VACUUM TABLE 3 HP
TIME PNEUMATIC PAD/SYNCHRONIZED 80MM
complete with exclusion from control panel board
BELT LENGTH 2620 MM
SECTIONED ELECTRONIC PAD/20 SECTORS  GI 1100 RRT
Complete with: each section 55 mm. – pad width 50 mm. completely extractable.
Infeed sectioned electronic bar to read the panels with serial connections through optical fibres to the control microprocessor.
The electronic bar displays the width of the panel and microprocessor determines the pad section which must go into position to sand the piece without damaging the angle
SECTIONED ELECTRONIC PAD/40 SECTORS GI 1100 RRT
Complete with: each section 28 mm., length of the pad 80mm, completely extractable.
Infeed sectioned electronic bar to read the panels with serial connections through optical fibres to the control.
The electronic bar displays the width of the panel and microprocessor determines the pad section which must go into position to sand the piece without damaging the angle
SECTIONED ELECTRONIC PAD/24 SECTORS GI 1300 RRT
Complete with: each section 55 mm. – pad width 50 mm. completely extractable.
Infeed sectioned electronic bar to read the panels with serial connections through optical fibres to the control
microprocessor.
The electronic bar displays the width of the panel and microprocessor determines the pad section which must go into position to sand the piece without damaging the angle
SECTIONED ELECTRONIC PAD/48 SECTORS GI 1300 RRT
Complete with: each section 28 mm., length of the pad 80mm, completely extractable.
Infeed sectioned electronic bar to read the panels with serial connections through optical fibres to the control microprocessor.
The electronic bar displays the width of the panel and microprocessor determines the pad section which must go into position to sand the piece without damaging the angle
SANDING KIT F/LACQUERED SURFACES 1100RRT
Complete with:
– Vacuum table
– Main motor with inverter 20 hp
– 1 timing pneumatic blower on the finishing group
– Sectioned electronic pad at 20 sections:
Each section 55 mm – pad width 50 mm – completely extractable.
– Infeed sectioned electronic bar to read panels with serial connections through optical fibres to the control microprocessor
The electronic bar displays the width of the panel and microprocessor determines the pad section which must go into position to sand the piece without damaging the angle
SANDING KIT F/LACQUERED SURFACES 1300RRT
Complete with:
– Vacuum table
– Main motor with inverter 20 hp
– 1 timing pneumatic blower on the finishing group
– Sectioned electronic pad at 24 sections:
Each section 55 mm – pad width 50 mm – completely extractable.
– Infeed sectioned electronic bar to read panels with serial connections through optical fibres to the control microprocessor
The electronic bar displays the width of the panel and microprocessor determines the pad section which must go into position to sand the piece without damaging the angle
CHECK CONTROL control board to indicate any anomalies
IN/OUT SHOE PRESSERS F/1ROLLER RRT made of 1 infeed shoe and 1 outfeed shoe to machine short pieces up to 130mm GI 1300
IN/OUT SHOE PRESSERS F/2ROLLERS RR each roller made of 1 infeed shoe and 1 outfeed shoe total 4 shoes to machine short pieces up to 130mm
IN/OUT SHOE PRESSERS FOR 1 ROLLER made of 1 infeed shoe and 1 outfeed shoe to machine short pieces up to 130mm increased frame (GI 1100)
IN/OUT SHOE PRESSERS F/2ROLLERS RR each roller made of 1 infeed shoe and 1 outfeed shoe total 4 shoes to machine short pieces up to 130mm increased frame (GI 1100)
OUTFEED CLEANING BRUSH D 200 MM 1,5 HP  to remove dust from the machined piece
SCOTCH-BRITE ROLLER DIA.200MM MOTOR1,5HP to further sand the machined piece
TYNEX BRUSH ROLLER – MOTOR 7,5HP to give a look of stressing-ageing
TOUCH SCREEN PROGRAMMER W/COLOUR DISPLAY for programming and memorizing the working cycles
ELECTRONIC SET ‘GRIT’ FOR 2 UNITS To memorize automatically the different degrees of removal controlled by the touch screen
TABLE AUT.POSITION. W/SENSORS ON THE MAT
EXTRA BELT
MAT VARIABLE SPEED DRIVE/CONTROL BOARD
2ND MOTOR 20 HP
BELT SPEED VARIATOR WITH INVERTER 20 HP
INCREASED MOTOR 25 HP
INCREASED MOTOR 30 HP
INCREASE FOR VOLTAGE OTHER THAN 400

GI 1100/2 RR

GI 1100/2 RRT

GI 1300/2 RR

GI 1300/2 RRT